Job Stories

This homeowner contacted HomeSpec after finding leaking cracks in the basement walls of her two-year-old home.  Our crew repaired the cracks, then installed a dehumidifier to control the moisture in the basement, and to keep the air dry and clean. 

This homeowner contacted HomeSpec because after heavy rains, the basement of her 78-year-old home was leaking where the floors and the walls meet. After opening up the floor, our crew discovered problems with the wall, but they overcame any obstacles and installed an interior drainage system to prevent future leakage. 

This homeowner contacted HomeSpec to have their wet basement waterproofed. Our crew did this by installing an interior drainage system and connecting it to a new sump pump, and installing our CleanSpace vapor barrier to the walls. This combination makes the ultimate waterproofing system--the vapor barrier prevents moisture from getting in, and the IDS collects any water and sends it to the sump pump. 

This homeowner contacted HomeSpec because he said the insulation in his crawl space was falling down, and was ineffective. Our crew removed the old insulation, which doesn't actually insulate crawl spaces very well, and installed our CleanSpace encapsulation system instead. This seals off the crawl space from the outside, protects it from moisture, and helps your home use less energy.   

These homeowners contacted HomeSpec because they had several vertical cracks in their foundation that were leaking. The previous owner of the home already had rod holes repaired. Our crew repaired the cracks by injecting them with our waterproof polyurethane sealant that is flexible enough to move with your wall (yes, your foundation walls move!) We also reinforced the crack with a carbon fiber power grid.

This Ann Arbor, Mi homeowner was moving his furniture around to rearrange and make room for a new couch they were going to be ordering. However, as they began moving things around, they discovered multiple wet spots under the carpet near the walls in the basement. Becoming concerned of water leaking into the basement and the threat of mold growth under the carpet if this wasn't handled properly, they began looking for contractors specializing in basement waterproofing near Ann Arbor, Mi. A family friend who had previous basement waterproofing work done by HomeSpec Basementfix referred the homeowner to us. Familiar with the Ann Arbor area, we sent a project manager skilled in basement waterproofing needs to meet with the homeowner and discuss the situation in more detail. All of our staff are specialized in their fields, to provide a custom approach and ensure those we work with are truly taken care of. After hearing the homeowner recount their experience in more detail, our project manager would begin a thorough inspection of the problem area to both determine the causes of the problem and help provide a customized solution that would best help them. After seeing the situation firsthand, a two-part solution set was proposed. We would want to catch the water leaking through the walls with a vapor barrier and then redirect it through a proper drainage system. Our crew would install the water guard basement drainage system to help filter water discreetly to a designated basin or sump pump. Water Guard is designed with special modular wall flanges that allow a customized shape that follows the perimeter of the basement wall and collects the water to redirect. Set to sit along the foundation footing, this systems design prevents mud clogging and is easily concealed under the main concrete floor once finished. During the installation, our crew was careful to uncarpet and temporarily remove some of the stairs to run the system all the way around the perimeter, which we had our crew of course, reinstall carpet and all once finished. To ensure that the water was collected and prevent any more moisture problems, we used the CleanSpace basement vapor barrier along the basement walls. This specially designed material is both heavily tear-resistant, antimicrobial to prevent the growth of mold and pests, while remaining flexible and customizable.With their basement waterproofing needs satisfied, the homeowner could continue to remodel and reorganize their home without worrying about any future basement water leaks or water damage.

A homeowner in Ann Arbor, MI had just moved into their new house. They were excited to finally begin a new chapter in their life, but soon realized that there was a major problem with the home. Every time it rained, water would leak through the walls of the basement, leaving large puddles on the floor and damaging some of their belongings. They were more concerned about the long term damage that could be caused to the basement, as well as the health risks associated with mold growth. They knew they needed to take action to solve the problem, but didn't know where to start. At first, they talked to neighbors and friends in hopes someone would have a solution, then they were advised to research some basement waterproofing companies nearby, which led them to setting an appointment with us. When our Project Manager, who specializes in basement waterproofing, arrived, he conducted a thorough inspection of the basement and determined that the water was entering through cracks in their walls. Because of these vertical cracks he recommended a combination of the Carbon Armor and WaterGuard Drainage System as the best solution to solve this homeowners problem. The Carbon Armor system is a high-strength carbon fiber material that is designed to reinforce foundation walls and prevent further cracking, while the WaterGuard Drainage System is an interior basement drainage system that collects water seeping in through the walls and channels it to a sump pump system that pumps it away from the home. Our crew got to work installing the Carbon Armor system first. They cleaned and prepped the walls before applying the carbon fiber strips, which were secured in place using a special epoxy adhesive. Once the Carbon Armor was installed, our crew moved on to the WaterGuard Drainage System. They began by excavating a trench around the perimeter of the basement floor. Then, they proceeded to install the WaterGuard drainage channel in the trench and cover it with a layer of clean stone. Our crew made sure to connect the drainage channel to a sump pump system, which would pump the water out of the basement and away from the home. After several hours, our crew finished the installation of both systems.The homeowner was amazed by the transformation of their basement. They no longer had to worry about water leaking through the walls, and could finally use the basement as additional storage space without fear of water damaging their stuff or mold growth. In the end, the homeowner was thrilled with the results and grateful for the expertise and professionalism of our crew.

A homeowner in Ann Arbor, MI had been eyeing a horizontal crack in their wall with water seeping through for some time. Despite having addressed the issue of sagging in the main floor before, they remained somewhat apprehensive about the situation. They voiced their concerns to us and we were determined to alleviate their concerns and provide an effective long term solution.  When our Project Manager arrived at the home, he began his assessment of the basement. Upon further inspection, he identified the horizontal cracks as a potential source of the water infiltration. He then consulted with the homeowner to discuss not only the crack repair but also prevent any future water-related issues. To accomplish this, he decided to employ a combination of the WaterGuard Drainage System, SuperSump Plus sump pump, and Carbon Armor Wall System to combat their basement waterproofing problem.  The first step when our crew arrived was to install the WaterGuard Drainage System. Our crew began by excavating a shallow trench along the perimeter of the affected area, then proceeded to lay the drainage channels along the trench. The WaterGuard also features a unique design that ensures it remains free from clogs caused by soil or debris. To address the issue of excess water buildup, our crew installed the SuperSump Plus. This sump pump system is designed to handle high pumping volumes, ensuring efficient water removal from the basement. Equipped with a powerful cast iron pump, the SuperSump Plus can effectively discharge water away from the property, keeping the basement dry and minimizing the risk of damage to the belongings or property. Finally, our crew would install the Carbon Armor wall system. Recognizing the importance of reinforcing the compromised wall, they utilized the Carbon Armor to provide additional support to the cracked wall, preventing further horizontal movement and potential structural issues. The Carbon Armor consists of strips made from high-strength carbon fiber, which are applied to the wall using a specialized epoxy resin. This technique creates a durable bond and significantly enhances the wall's stability, effectively resolving any of the concerns about sagging or structural problems. With the installation of the WaterGuard Drainage System, SuperSump Plus sump pump, and Carbon Armor Wall System, we provided this homeowner with a comprehensive and reliable solution that not only addressed the immediate problem but also offered long-term peace of mind.

A homeowner in Ann Arbor, MI had experienced water damage problems in their basement a few years ago, leaving them concerned about its long-term stability. Determined to protect their investment and create a secure living space, they reached out to friends and family for recommendations. The homeowner had no immediate concerns, but they were contemplating finishing their basement to add property value and maximize their living space. However, before investing thousands of dollars into a basement remodel, they wanted to analyze the foundation of their home. Understanding the significance of getting the project done right, they reached out to us for a solution.   When our Project Manager arrived, he began by inspecting the basement, taking into account the previous water damage and the age of the house, which was built in 1965. Once he had completed his inspection, he crafted a tailored solution that would not only address the existing water damage but also provide long-lasting protection to this family. He first recommended they install the WaterGuard Drainage System to address the waterproofing needs and then recommended the SuperSump Plus to ensure the water was being removed efficiently. The WaterGuard, a french drain system, is designed to capture water seepage and direct it away from the basement, preventing it from causing any damage. This specific system features a design that allows it to be installed without requiring any external digging or excavation. Furthermore, he proposed installing the SuperSump Plus sump pump system. This sump pump uses a powerful pump, a durable liner, and an airtight lid to ensure its collecting water and redirecting it away from the basement,    When our crew arrived to install the systems, they began by excavating a small section of the basement floor along the perimeter, creating a trench for the WaterGuard system. The drainage pipes were then installed, ensuring that any water entering the basement would be collected and diverted towards the SuperSump Plus sump pump. After the WaterGuard system was securely in place, our crew set up the SuperSump Plus. They positioned it at the lowest point in the basement, allowing it to collect the most amount of water.   Happy to have their concerns addressed, the homeowner now had a robust waterproofing system in place, safeguarding their basement from potential water damage and providing the foundation for a worry-free remodeling project.  

A homeowner in Ann Arbor, MI had been experiencing a persistent issue for some time, more specifically, wet and damp walls in their crawl space, especially on one particular wall adjacent to her driveway were beginning to frustrate them. Finally realizing it was time to find a solution for the moisture issue they reached out to us for help. When our Project Manager arrived and began inspecting the crawl space, he confirmed that the dampness and moisture issues were coming from the exterior wall next to the driveway. He explained to the homeonwer that water could seep into the crawl space through cracks or gaps in the foundation, especially if the area was not properly sealed and protected. To tackle the homeowners concerns, our Project Manager proposed a two-step approach. First, he recommended encapsulating and insulating the crawl space using our CleanSpace encapsulation. Then he recommended installing the SaniDry Sedona and SmartJack Support System to fully support the wall and ensure no moisture would penetrate the barrier.  Our crew began their work by clearing out any debris and cleaning the crawl space thoroughly. Then they installed a heavy-duty vapor barrier across the entire crawl space floor and up the walls, ensuring there was an airtight seal. This barrier would effectively isolate the crawl space from external moisture sources, keeping it dry and protected. Next, to combat the excess humidity within the crawl space, our crew installed a Sanidry Sedona dehumidifier. This energy-efficient dehumidification system would remove excess moisture from the air, preventing the growth of mold and mildew while maintaining a healthy humidity level throughout the crawl space. Finally, our crew introduced the SmartJack Support System to address the structural damage related to the wet wall near the driveway. They placed the adjustable steel jacks beneath the sagging areas, providing the wall with immediate stabilization and support to the foundation. Now this homeowner could enjoy the peace of mind that comes with a dry and healthy living environment because of the encapsulation and structural support we provided.